Bonjour Mesdames,Monsieurs,
J'ai un soucis avec mon HP procurve 2848, je n'arrive pas à activer le snmp ( l'interface web & ping & telnet -> fonctionne correctement ).
Voici les requêtes effectués pour tester ( 192.168.12.230):
Code :
- [root@ces:~/09:41:11]# ping -c 1 10.0.0.3
- PING 10.0.0.3 (10.0.0.3) 56(84) bytes of data.
- 64 bytes from 10.0.0.3: icmp_seq=1 ttl=64 time=1.15 ms
- --- 10.0.0.3 ping statistics ---
- 1 packets transmitted, 1 received, 0% packet loss, time 0ms
- rtt min/avg/max/mdev = 1.158/1.158/1.158/0.000 ms
- [root@ces:~/09:41:14]# snmpwalk -v 1 -c public 10.0.0.3
- Timeout: No Response from 10.0.0.3
|
Voici ma configuration :
Code :
- SW3_STIPA(config)# show config
- Startup configuration:
- ; J4904A Configuration Editor; Created on release #I.10.70
- hostname "SW3_STIPA"
- snmp-server contact "STIPA"
- snmp-server location "Montreuil"
- no cdp run
- interface 1
- no lacp
- exit
- interface 2
- no lacp
- exit
- ....
- Tronqué ( de 3 à 43 )
- ....
- interface 44
- no lacp
- exit
- interface 45
- name "INTERCO_VERS_SW1"
- no lacp
- exit
- interface 46
- name "INTERCO_VERS_SW1"
- no lacp
- exit
- trunk 45-46 Trk2 Trunk
- ip default-gateway 192.168.12.1
- snmp-server community "public" Operator
- snmp-server community "snmp-private" Operator Unrestricted
- snmp-server host 192.168.12.230 "public"
- snmp-server enable traps authentication
- vlan 1
- name "DEFAULT_VLAN"
- untagged 33-34,36-44,47-48,Trk2
- ip address dhcp-bootp
- no untagged 1-32,35
- exit
- vlan 11
- name "VLAN_STIPA"
- untagged 1-32
- no ip address
- tagged Trk2
- exit
- vlan 12
- name "VLAN_PROCESS"
- untagged 35
- ip address 192.168.12.13 255.255.255.0
- tagged Trk2
- exit
- vlan 20
- name "VLAN_TOIP"
- ip address 10.0.0.3 255.255.255.0
- tagged 1-44,Trk2
- exit
- spanning-tree
- spanning-tree Trk2 priority 4
- spanning-tree priority 4
- ip ssh version 1-or-2
- password manager
|
Merci d'avance de votre aide!
Bonne journée
Message édité par stipa it le 20-03-2014 à 11:15:00
