Bonjour,
Je souhaite mettre une imprimante multifonction (HP C4680) sur mon réseau, et je passe pour cela via un Dockstar.
J'ai un soucis avec saned, qui plante dès que le périphérique a été utilisé (avec succès) une et une seule fois.
C'est pas pratique pour un accès réseau.
Voici le log, suite à un simple scanimage sur le client :
# saned -d5
[saned] main: starting debug mode (level 5)
[saned] read_config: searching for config file
[saned] read_config: done reading config
[saned] saned (AF-indep+IPv6) from sane-backends 1.0.23 starting up
[saned] do_bindings: trying to get port for service "sane-port" (getaddrinfo)
[saned] do_bindings: [1] socket () using IPv6
[saned] do_bindings: [1] setsockopt ()
[saned] do_bindings: [1] bind () to port 6566
[saned] do_bindings: [1] listen ()
[saned] do_bindings: [0] socket () using IPv4
[saned] do_bindings: [0] setsockopt ()
[saned] do_bindings: [0] bind () to port 6566
[saned] do_bindings: [0] bind failed: Address already in use
[saned] run_standalone: spawning Avahi process
[saned] run_standalone: waiting for control connection
[saned] saned_avahi_callback: AVAHI_CLIENT_CONNECTING
[saned] handle_connection: processing client connection
[saned] check_host: detected an IPv4-mapped address
[saned] check_host: access by remote host: ::ffff:192.168.0.21
[saned] check_host: remote host is not IN_LOOPBACK nor IN6_LOOPBACK
[saned] check_host: local hostname: dockstar
[saned] check_host: local hostname(s) (from DNS): localhost.localdomain
[saned] check_host: local hostname(s) (from DNS): (null)
[saned] check_host: local hostname(s) (from DNS): (null)
[saned] check_host: local hostname(s) (from DNS): (null)
[saned] check_host: local hostname(s) (from DNS): (null)
[saned] check_host: local hostname(s) (from DNS): (null)
[saned] check_host: remote host doesn't have same addr as local
[saned] check_host: opening config file: /etc/hosts.equiv
[saned] check_host: can't open config file: /etc/hosts.equiv (No such file or directory)
[saned] check_host: opening config file: saned.conf
[saned] check_host: config file line: `# saned.conf'
[saned] check_host: config file line: `# Configuration for the saned daemon'
[saned] check_host: config file line: `'
[saned] check_host: config file line: `## Daemon options'
[saned] check_host: config file line: `# Port range for the data connection. Choose a range inside [1024 - 65535].'
[saned] check_host: config file line: `# Avoid specifying too large a range, for performance reasons.'
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `# ONLY use this if your saned server is sitting behind a firewall. If your'
[saned] check_host: config file line: `# firewall is a Linux machine, we strongly recommend using the'
[saned] check_host: config file line: `# Netfilter nf_conntrack_sane connection tracking module instead.'
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `# data_portrange = 10000 - 10100'
[saned] check_host: config file line: `'
[saned] check_host: config file line: `'
[saned] check_host: config file line: `## Access list'
[saned] check_host: config file line: `# A list of host names, IP addresses or IP subnets (CIDR notation) that'
[saned] check_host: config file line: `# are permitted to use local SANE devices. IPv6 addresses must be enclosed'
[saned] check_host: config file line: `# in brackets, and should always be specified in their compressed form.'
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `# The hostname matching is not case-sensitive.'
[saned] check_host: config file line: `'
[saned] check_host: config file line: `#scan-client.somedomain.firm'
[saned] check_host: config file line: `#192.168.0.1'
[saned] check_host: config file line: `#192.168.0.1/29'
[saned] check_host: config file line: `#[2001:db8:185e::42:12]'
[saned] check_host: config file line: `#[2001:db8:185e::42:12]/64'
[saned] check_host: config file line: `192.168.0.1/24 # adresse_reseau/bits_masque - On autorise tout le réseau 192.168.0.*'
[saned] check_host: subnet with base IP = 192.168.0.1, CIDR netmask = 24 # adresse_reseau/bits_masque - On autorise tout le réseau 192.168.0.*
[saned] check_host: access granted from IP address 192.168.0.21 (in subnet 192.168.0.1/24 # adresse_reseau/bits_masque - On autorise tout le réseau 192.168.0.*)
[saned] init: access granted
[saned] init: access granted to cactus@::ffff:192.168.0.21
[saned] process_request: waiting for request
[saned] process_request: got request 1
[saned] process_request: waiting for request
[saned] process_request: got request 10
[saned] bailing out, waiting for children...
[saned] bail_out: all children exited
|
Dans la mesure où cela fonctionne quand même, je ne pense pas qu'il s'agisse d'un pb de configuration...
Une idée pour m'aider ?
Merci pour votre aide.
Message édité par cactus le 27-10-2012 à 18:36:45
(ça aidera peut-être un jour quelqu'un !)