Bonsoir,
Je viens d'installer une Lenny sur un nouveau disque dur mais au démarrage il y a problème.
Apparemment mon disque dur se trouve en hda mais Mr cherche en hde et après se plaint de ne pas trouver de racine.
Je dis à Grub d'aller voir dans hda mais il continue ses fouilles dans hde 
Tel qui l'est après l'installation, il cherche sur hde1
Code :
- kernel /boot/vmlinuz-2.6.26-1-686 root=/dev/hde1 ro
|
Et me met ceci :
Code :
- [ 1.280189] hda: WDC WD800JB-00JJC0, ATA DISK drive
- [ 1.952158] hda: UDMA/100 mode selected
- [ 2.816110] hdc: SAMSUNG CD-ROM SC-152G, ATAPI CD/DVD-ROM drive
- [ 3.152343] hdc: HWDMA2 mode selected
- [ 3.153631] ide0 at 0x1f8-0x1f7,0x3f6 on irq 14
- [ 3.158559] ide1 at 0x178-0x177,0x376 on irq 15
- [ 3.165225] hda: max request size: 128KiB
- [ 3.165394] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63
- [ 3.165584] hda: cache flushes supported
- [ 3.165685] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > done
- Begin: Running /scripts/init-premount ... [ 3.269325] ACPI: ACPI0007:00 is registered as cooling_device0
- [ 3.269390] ACPI: Processor [CPU1] (supports 16 throttling states)
- [ 3.666374] hdc: ATAPI 52X CD-ROM drive, 128kB Cache
- [ 3.666546] Uniform CD-ROM driver Revision: 3.20 done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done
- Begin: Waiting for root file system ...
|
Quand je dis à Grub d'aller voir sur hda1, j'ai cela :
Code :
- fsck.ext3: No such file or directory while trying to open /dev/hde6
- /dev/hde6:
- The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock us corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device>
- fsck.ext3: No such file or directory while trying to open /dev/hde8
- /dev/hde8:
- The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock us corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device>
- fsck died with exit status 8
- failed (code 8).
- File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. failed!
- A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. (warning).
- Give root password for maintenance
- (or type Control-D to continue):
|
Mais le fichier log n'existe pas.
J'ai déjà eu ce problème plusieurs fois mais c'était à cause d'un disque dur externe qui gênait l'interne, hors ici le disque dur est seul et rien de brancher en USB.
Message édité par Gavrinis le 26-02-2009 à 23:24:25
