carte mere compatible sempron
 
photo de la carte mere
 

 
description
 
CPU  
 
• Supports Socket A for AMD® Athlon™/Athlon™ XP/Duron™/Sempron™  processors FSB 100/133/166    
• Supports up to Athlon™ XP 2700+ processor or higher
 
 
 
 
 
Chipset  
 
• NVIDIA® nForce2 IGP Chipset
- Integrated TV encoder
- Supports DDR266/333 with internal graphic core, DDR266/333/400 with external  
  add-on card
- AGP 3.0 8x interface at 533MHz
 
• NVIDIA® nForce2 MCP2 or MCP2-T Chipset
- AC97 Interface supporting up to two concurrent codecs
- Ultra ATA133 for the fastest hard disk throughput
- USB 2.0 EHCI/1.1 OHCI controller
- FireWire® and USB 2.0 for the fastest digital connectivity (MCP2-T only)
- Audio Processing Unit(APU) encodes audio in Dolby® Digital 5.1 format for full surround
  sound effects (MCP2-T only)
 
 
 
 
 
FSB  
 
• 100/133/166(200/266/333)MHz clocks are supported.  
 
 
 
 
 
Main Memory  
 
• Supports six memory banks using three 184-pin DDR DIMMs
• Support Dual channel PC3200/2700/2100/1600 DDR SDRAMs
• Supports both 64-bit and 128-bit DDR SDRAM
• Maximum memory size of 3GB  
 
NOTE: nForce2 only NOT support x4 memory device. 1GB can be made by other density of DRAM chip such as x 8, x16.  
 
 
 
 
 
Slots  
 
• One AGP (Accelerated Graphics Port) 1.5V 4x/8x slot
• Five 32-bit PCI bus slots (support 3.3v/5v PCI bus interface)
• One ACR (Advanced Communication Riser) slot
 
 
 
 
 
On-Board IDE  
 
• An IDE controller on the MCP2/MCP2-T chipset provides IDE HDD/CDROM with PIO, Bus Master and Ultra DMA133/100/66 operation modes
• Can connect up to four IDE devices
 
 
 
 
 
Serial ATA Interface  
 
• Support 2 serial ATA plus 1 ATA133
- RAID O or 1 are supported
- RAID function works w/ATA133+SATA H/D or 2 SATA H/D
• Connect up to 2 Serial ATA devices and 1 ATA133 device  
 
In-Chip TV-out
 
• Integrated TV-out encoder, through external bracket  
 
 
 
In-Chip IEEE1394    
 
• nVIDIA MCP2-T IEEE1394 controller
- Support up to two ports via external bracket  
 
 
 
 
 
Audio  
 
• Realtek ALC650 6-channel audio
- Dolby Digital 5.1 format (with MCP2-T option)  
 
 
 
 
 
Network
 
• Chipset integrated 10/100 Base-T Ethernet/Fast Ethernet  
 
 
 
 
 
On-Board Peripherals  
 
On-Board Peripherals include:
- One floppy port that supports two FDD with 360KB, 720KB, 1.44MB and 2.88MB  
- 1 serial port and 1 VGA port
- 1 parallel port supports SPP/EPP/ECP mode
- 3 audio ports in vertical
- 2 IEEE1394 connectors (Optional)
- 6 USB ports (Rear * 4/ Front * 2)  
- 1 RJ-45 jack  
 
 
 
 
 
BIOS  
 
• The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices  
  and expansion cards of the board automatically.
• The mainboard provides a Desktop Management Interface (DMI) function which records  
  your mainboard specifications.
 
 
 
 
 
Dimension
 
• 30.5 cm(L) x 23 cm(W) ATX Form Factor  
 
Mounting
 
• 6 mounting holes.  
 
 
+ ventirad cuivre aero cool
 
50 in
 
gizmo

up

up

up

up

up

up

up

up

up

up

up

up

up

up et coucou lmurien

up

up
 

up

tu as remplacé le ventilateur de la CG par un ventirad?
tes impressions?

???????
 
la carte graphique est integrer
pas de ventitrad c'est le rad d'origine
 
gizmo

up

up

j'ai la même en version ILSR et c'est un ventilateur sur la CG il me semble... bizarre

mais ya pas de carte graphique sur la cm ya un chipset qui comprend la carte graphique
ya un port agp 8x mais qui est libre compte tenu du fait que la carte graphique ce loge a la place du second port comme sur la plaque arriere de la cm
de toute maniere je la garde
gizmo

c'est bien de la CG intégrée que je parle: chez moi ya un petit ventilateur

a ok envoie une photo que je voie ca de mon oeil unique
 
seb

c'est tout simplement le modele qui doit etre different je sais que sur certaine asus y'avait le ptit ventillos
 
seb

En dessous de 80 posts tu peux le supprimer toi même
 
cyb£r